Table of Contents
Advertisement
Unpairing procedure between MorphoAccess and PC
This procedure is useful when a couple of MorphoAccess Sigma Wave and PC Wave are
changed by new devices. This unpairing procedure explain you how to disassociate a
couple of device.
Procedure:
1. Unconnect the RJ45 cable on the port "PC Wave" of the Ethernet switch to unconnect
the PC and MorphoAccess Sigma Wave. It is not required to have the external network
connected. Following screen will be displayed once the cable has been disconnected :
2. On the MorphoAccess Sigma Wave side, go in administration menu :
This document and the information therein are the property of Morpho.
82
They must not be copied or communicated to a third party without the prior written authorization of Morpho
TM
MorphoWave
Select settings menu
Go in terminal settings
OEM – Installation guide
Annex 1 : Maintenance
2015_2000009096 V4
May 2017
Advertisement
Table of Contents
