Safran Morpho MorphoWave OEM Installation Manual page 63

OEM – Installation guide
TM
MorphoWave
Section 4 : First boot
MorphoWave
status and polling buffer data.
How to Activate?
External database mode can be activated through Webserver > Complete
Configuration, by setting "ucc.enable_external_database" parameter to 1. Only an
admin user can activate polling mode. You can refer to the MorphoWave
System Interface Specification document to know how to set this parameter.
2015_2000009096 V4
May 2017
TM
OEM terminal also has distant commands to retrieve polling buffer
This document and the information therein are the property of Morpho.
They must not be copied or communicated to a third party without the prior written authorization of Morpho
TM
OEM Host
63