Table of Contents
Advertisement
MorphoWave
At this stage all component have been prepared, it is time to connect devices together.
Material required (not included):
-
Ethernet cable : 3 (2 internal + 1 for network connectivity)
-
Power supply or Power Over Ethernet for MorphoAccess Sigma
Installation procedure
Components wiring requires to not connect power supply of devices during this
operation.
Connect on the PC the biometric sensor on a USB 3.0 port (blue internal socket).
Connect on the PC the RJ45 cable.
Connect on the PC the power wire of the power adapter.
Connect RJ45 cables on the Ethernet switch.
o 1 port is dedicated for the RJ45 cable coming from the PC ("PC Wave").
o 1 port is dedicated for the RJ45 cable coming from the MorphoAccess
o 1 port is optional and dedicated for customer network connection
o Please do not use the 2 other ports which are reserved for maintenance
This document and the information therein are the property of Morpho.
52
They must not be copied or communicated to a third party without the prior written authorization of Morpho
TM
OEM wiring
Sigma Wave ("MAsigma").
("External").
purpose only.
OEM – Installation guide
TM
MorphoWave
Section 3 :Installation Procedure
2015_2000009096 V4
May 2017
Advertisement
Table of Contents
