Morphoaccess ® J Series Technical Characteristics - Safran MorphoAccess J Series Installation Manual

®
MorphoAccess J Series – Installation Guide
5. MorphoAccess
Characteristics
Item
Access control modes
Man Machine Interface
Biometry (fingerprint)
Fingerprint capacity
Fingerprint recognition
speed
Log capacity
LAN connection
RFID cards
®
(MorphoAccess J-Dual
only)
Output serial port
Output relay switches
USB host port
Input signals
DOCUMENT SSE-0000077503-04 - M
M D - R
ORPHO OCUMENT EPRODUCTION AND DISCLOSURE PROHIBITED
®
J Series Technical
Identification (search for fingerprint in local database)
Authentication with contactless card, with or without fingerprint check
(only if equipped with a smartcard reader)
Multi-factor: identification or authentication (only if equipped with a
smartcard reader)
Proxy: the access control check is fully driven by a remote system
Multi color LED
Multi tone Buzzer
14 x 22 mm (W x H) fingerprint sensor
Morpho Compact Biometric Module inside: 500dpi, 256 gray levels
optical sensor
False Acceptance Ratio (FAR) adjustable from 10
Standard: 1000 fingerprints (500 records, with 2 fingerprints each).
With licence: 6000 fingerprints (3000 records, with 2 fingerprints each)
Identification: 0,8s typical (500 records), 1,3s typical (3000 records)
Authentication with contactless card: 0,6s typical
8000 records (one per access request)
For terminal configuration and data transfer:
• Ethernet 10/100 Base T
• Or Wi-Fi™ Wireless LAN (option), WEP and WPA encryption
available
• Either TCP or SSL protocol
®
MIFARE 1k, 4k
®
DESFire 2k, 4k, 8k
The serial port provides WIEGAND, DATACLOCK ISO2, or RS485
protocol
Access granted: 1 switch (either "open" or "close" in default state)
Tamper and/or antitheft detection: one switch ("close" in default state).
Rear port for Wi-Fi™ USB adaptor (option)
Front port for terminal configuration through a USB mass storage key
LED IN to activate the access granted relay
2011
ARCH
Section 2: General Description
Description
-2
down to 10
-8
13