Table of Contents
Advertisement
OEM – Installation guide
TM
MorphoWave
Section 2 : General Description
TM
MorphoWave
Model type
Capture type
Capture capacity per
swipe motion
Max hand speed
Dimensions (W x H x
D)
Weight
Host PC Connectivity USB 3.0
Capture Volume
(W x H x D)
Operating
Temperature
Operating Humidity
Storage Temperature -30°C (32°F) to 60°C (113°F)
Storage Humidity
Sealing
Operating Lighting
Altitude
Pollution Degree
Overvoltage
Category
Power Supply
Certifications
2015_2000009096 V4
May 2017
Desktop technical description
Hardware Features
MorphoWave
Hand swipe through the active volume without contact
Up to 4 fingers
0.5 m/s (19.7 in/sec)
Product Dimensions
133mm x 350mm x 341mm
5.23in x 13.78in x 13.42in
3.5 kg (7.7lb) including external power supply
Interface
Environmental Conditions
40mm x 39mm x 80mm
1.57in x 1.53in x 3.14in
0°C (32°F) to 43°C (109.4°F)
10%– 80% Humidity rate, non-condensing
5%– 95% Humidity rate, non-condensing
IP 65 on the acquisition glass area
IP 6X (dust protected) for the entire sensor
To be operated indoor in controlled ambient light conditions.
The device shall not be exposed to direct sunlight.
2000 ft
1 (No pollution or dry only, non-conductive pollution occurs)
Category 2
90 ~264V AC (47Hz-63Hz) compatible with Europe, USA &
UK connector
Certifications
CE, UL 60950-1, FCC part 15 Class B, RoHS, REACH,
WEEE
This document and the information therein are the property of Morpho.
They must not be copied or communicated to a third party without the prior written authorization of Morpho
©
Desktop (previously Finger On The Fly
®
)
25
Advertisement
Table of Contents
