Table of Contents
Advertisement
OEM – Installation guide
TM
MorphoWave
Section 3 : Installation Procedure
MorphoWave
Prior components wiring, the MorphoWave
2015_2000009096 V4
May 2017
TM
Desktop installation
TM
To access the power supply and USB cable,
remove the rear plastic cover with an M3 CHC
screwdriver.
Unfold the USB 3.0 cable previously hidden by the
rear cover.
Connect the power supply jack to the bottom
connector and position the cable between the
metal frame and the bracket. Use the tie wrap
provided to attach the cable to the bracket through
the pre-drilled hole.
Reattach the rear cover.
This document and the information therein are the property of Morpho.
They must not be copied or communicated to a third party without the prior written authorization of Morpho
Desktop has to be prepared as following:
51
Advertisement
Table of Contents
