Table of Contents
Advertisement
OEM – Installation guide
TM
MorphoWave
Section 3 : Installation Procedure
Cabling
Cable for wiring shall be AWG 20 to 24, length shall be 12 cm to 15 cm (stripped on
0,6mm).
Prefer rigid cable to flexible cable (easier to connect)
Connection details:
Conductor cross section solid or stranded
Conductor cross section stranded, with ferrule without plastic
sleeve
Conductor cross section AWG/kcmil
Closing
Don't forget to insert battery before closing product, but power has to be set up just
after closing it. If product has to be stored, don't forget to remove the battery.
Lock the product with the lower screw.
2015_2000009096 V4
May 2017
Figure 11: Cabling preparation
Characteristics
This document and the information therein are the property of Morpho.
They must not be copied or communicated to a third party without the prior written authorization of Morpho
min
max
0.2 mm²
0.5 mm²
0.25
0.5 mm²
mm²
24
20
35
Advertisement
Table of Contents
