Table of Contents
Advertisement
OEM – Installation guide
TM
MorphoWave
Section 3 : Installation Procedure
Drilling the mounting holes
21mm
If not present, drill in the wall a hole with a diameter of 67mm (see Figure 8: Drilling
template. This template can be found in the Quick Installation Guide).
Confirm the presence inside the hole of all the cables needed for the electrical
installation.
Drill in the wall 4 holes with a diameter adapted to screws and fit them with the raw
plugs (see Figure 8: Drilling template).
2015_2000009096 V4
May 2017
59mm
88mm
Figure 8: Drilling template
This document and the information therein are the property of Morpho.
They must not be copied or communicated to a third party without the prior written authorization of Morpho
40mm min
33
Advertisement
Table of Contents
