Table of Contents
Advertisement
MorphoWave™ OEM Wave Technical Characteristics
Item
Access control modes
Man Machine Interface
Biometrics
Log capacity
LAN connection
Serial port
Output relay switches
Input signals
Power supply
This document and the information therein are the property of Morpho.
22
They must not be copied or communicated to a third party without the prior written authorization of Morpho
Identification (search for fingerprint in a local database)
Authentication with user ID checking with biometry
Proxy: the access control check is fully driven by a
remote system
5" WVGA color Touch-screen
VGA camera for face image capture and videophone
Loudspeaker & Microphone
External and innovative Morpho sensor: MorphoWave
Desktop. It is 4 fingers contactless sensor.
NB: You may receive a MorphoAccess Sigma Wave still
equipped with a slap sensor built-in. In a MorphoWave
OEM® context this sensor is disabled.
False Acceptance Rate (FAR) adjustable from 1% down
to 10-7%
Database capacity: 10.000 users (standard) and up to
40.000 users (license upgrade). One user template is
composed of 8 fingerprints for both hands except
thumbs.
100 000 records (standard) and up to 1 000 000 (with
specific license)
For terminal configuration and data transfer:
Ethernet 10/100 Base T (MDI, MDI-X)
Either TCP, SSL or TLS protocol
The serial port supports WIEGAND, DATACLOCK (ISO2),
RS422 and RS485 protocols
Access granted: 1 switch (normally "open")
LED1/LED2 to activate the access granted relay
12 to 24 V DC power supply (1A min @12V)
Or RJ45 connector with optional Power Over Ethernet
component
OEM – Installation guide
TM
MorphoWave
Section 2 :General Description
Description
2015_2000009096 V4
May 2017
Advertisement
Table of Contents
