Safran Morpho MorphoWave OEM Installation Manual page 53

OEM – Installation guide
TM
MorphoWave
Section 3 : Installation Procedure

Connect the power adaptor of the MorphoWave

Connect the power adaptor of the Ethernet switch on the rear side.

Connect the power adaptor of the PC.

Connect the power supply of the MorphoAccess sigma.

Turn it all to ON state.

The system will boot by itself.
2015_2000009096 V4
May 2017
This document and the information therein are the property of Morpho.
They must not be copied or communicated to a third party without the prior written authorization of Morpho
TM
Desktop.
53