Morphoaccess® J Series Terminal Modes; Identification Mode; Authentication (Verification) Mode; Multi-Factor Mode - Safran MorphoAccess J Series Installation Manual

®
MorphoAccess J Series – Installation Guide
1. MorphoAccess
modes

Identification mode

Authentication (verification) mode

Multi-factor mode

DOCUMENT SSE-0000077503-04 - M
M D - R
ORPHO OCUMENT EPRODUCTION AND DISCLOSURE PROHIBITED
®
Local identification (fingerprint capture) with a local base.
This is the default mode for terminals that are not equipped with a contactless
smartcard reader.
®
MorphoAccess J Series terminals equipped with a contactless smartcard
reader are able to capture fingerprints and verify them against a reference
stored in a contactless smartcard.
They are able to read both MIFARE
This is the default mode for the terminals that are equipped with a contactless
smartcard reader.
Identification and authentication are both allowed.
2011
ARCH
Section 5: User Interface
J Series terminal
® ®
and DESFire cards.
53