Ddd-Disable Dual-Link Dvi Inputs; Def-Factory Defaults; Dtl-Sharpness Detail - Christie Boxer 4K Technical Reference

(CSP 1)
Set the projector to always automatically detect the color space:
(CSP 0)
DDD–Disable Dual-Link DVI Inputs
Enables or disables the secondary DVI receiver on all Dual-Link DVI cards.
Commands
Command Description
DDD <0 | 1> Enables or disables the secondary DVI
receiver on Dual-Link DVI cards. This
command is only available if video
electronics are on. (Saved value)
DEF–Factory Defaults
Resets Boxer 4K to its factory default values.
Note the following about this command:
• Performing this command while the power is on does not reset the Lamp Selection value while
in limited mode.
• Resets the network settings to be DHCP enabled.
• Deletes all user profiles, warps, and blends.
Commands
Command Description
DEF 111 Restores all settings to the factory defaults.
To prevent accidental use of this command, the number 111 must
follow the command.
Examples
Reset Boxer 4K to factory defaults:
(DEF 111)
DTL–Sharpness Detail
Adjusts the sharpness of scaled video to alter the amount of visible detail.
This command does not affect unscaled video.
Boxer 4K Serial API Commands Technical Reference
020-101697-05 Rev. 1 (07-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Serial API commands
Values
0 = Enables Dual-Link support (Default)
1 = Disables Dual-Link support
Values
—
21