Def-Factory Defaults; Dmx-Dmx/Artnet - Christie Mirage SST Technical Reference

(DDD 0)
Disable Dual-Link support:
(DDD 1)
DEF–Factory Defaults
Resets Mirage SST to its factory default values.
Note the following about this command:
• Resets the network settings to be DHCP enabled.
• Deletes all user profiles, warps, and blends.
Commands
Command Description
DEF 111 Restores all settings to the factory defaults.
To prevent accidental use of this command, the number
111 must follow the command.
Examples
Reset Mirage SST to factory defaults:
(DEF 111)
DMX–DMX/ArtNet
Configure DMX/Art-Net settings.
Commands
Command Description
DMX+CHAN <value> Sets the base channel for Art-Net.
DMX+ENBL <value> Enables or disables the Art-Net interface.
DMX+NETS <value> Configures the Art-Net network.
DMX+SUBN <value> Sets the Art-Net subnet.
DMX+UNVS <value> Configures the Art-Net universe number.
Mirage SST Technical Reference–Serial Commands
020-103005-03 Rev. 1 (01-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
111
Values
1 to 488
1 (Default)
0 = Disables the Art-Net interface (Default)
1 = Enables the Art-Net interface
0 to 127
0 (Default)
0 to 15
0 (Default)
0 to 15
0 (Default)
26