c) To confirm the address, select Enter.
d) To add a second and third IP address, repeat steps a to c for Address 2 and Address 3.
3. From the web interface:
a) For Address 1, select Edit.
b) Enter the IP address.
c) Select Apply.
d) To add a second and third IP address, repeat steps a to c for Address 2 and Address 3.
Downloading the SNMP MIB files
The SNMP management information base (MIB) files describe the data format used by SNMP.
1. Select MENU > Communications > SNMP.
2. To download the SNMP MIB files, select Download File.
The files are downloaded to the default location on the computer.
Restoring factory default settings
Restoring factory settings removes all custom device settings.
Only Christie qualified technicians can reset factory defaults.
1. From the display panel, select MENU > Admin > Service.
2. Enter the service password.
3. Select Reset Factory Defaults.
4. At the confirmation prompt, select Reset.
Crimson Series User Guide
020-102649-07 Rev. 1 (05-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Diagnostic tools
62