34/84
6
Operation
6.1
Customer display
1
2
9
6.1.1
Display cycle options
© Landis+Gyr
The meter is fitted with a custom LCD display. A 'display test' is
illustrated below showing all segments lit.
3
4
Figure 15. E230 ZMR100xR customer display
1. Reactive creep indicator
2. Energy direction indicator
3. Active creep indicator
4. Tamper alert indicator
5. Phase indicator
6. Battery level
7. Register indicator
8. Register value (8 digits)
9. Current register text or OBIS code (5 digits)
Rate and/or Relay and/or tamper status indication (triangles)
o
Custom configuration options control which registers and parameters
that are shown on the display. The meters are factory configured to the
utility company's specification. The display sequence and the on screen
duration are also dependent on the meter's factory setup. Below is a
brief indication of what can be displayed. (Please see the configuration
options document for complete options.)
Channels 1-6 (ZxR100xC) or 1-8 (ZMR100xR)
Rates 1-4 (ZxR100xC) or 1-6 (ZMR100xR), active rate and total
IRMS and VRMS per phase
Power Factor per phase and for all phases
kW, kVAr and kVA per phase, summed and total
D000044352 en g – E230 Residential Electricity Meter – ZxR100xC/ZMR100xR – User Manual
5
6
8
Operation
7