Total Units Counter (10 Wh Resolution) (Register 061); 5.1.28 Last Fifty 20 Digit Numbers Entered Into The Meter; 5.1.29 Customer Information Mode - Landis+Gyr Cashpower Gem Lite User Manual

Information Functions

5.1.27 Total Units Counter (10 Wh Resolution) (Register 061)

The meter displays the total kWh consumed, with a resolution of 0.01kWh, since the meter was put into service.

5.1.28 Last fifty 20 digit numbers entered into the meter

Meter stores the last fifty 20 digit STS numbers entered into the meter in fifty separate registers.

Register 301 Last 20 digit token entered
Register 302 2nd Last 20 digit token entered
Register 303 to Register 349 – 3rd last to 49th last token entered
Register 350 50th last token entered


5.1.29 Customer Information Mode

The Customer Information Mode is entered via info-register 600.
On entering the Customer Information Mode, meter will display as follows:

All lines on the display (typical information mode display)

Information mode icon flashing
Now enter the register number in the table below
Code
000
001
002
004
005
006
007
008
009
030
050
100
101
102
200
201
Cashpower Gem Lite – User Guide
Review
The meter displays the 20 digit STS number scrolling from right to left,
followed by the date and time stamp which indicates when the token was
created at the vending system (Date & time format is DDMMYYYY hhmm)
A display of 0000 0000 0000 0000 0000 implies that the register does not
contain a record of an STS token.
Function
test all
open the disconnect-device
switch all LCD segments on and flash the rate LED
display total units counter
display key revision and key type
display tariff index
display power limit level
display the meter tamper status
display available credit
display the meter supply group code
instantaneous power
display the meter number
display the software version number
display the VTC mapping number
display value of last credit token
display id of last credit token
27/27
© Landis+Gyr (Pty) Ltd