•
Harmonic Amplitude: click or tap any cell in the Amplitude column and use the
pop-up virtual keypad to set the amplitude for the harmonic with the specified
order.
•
Harmonic Phase: click or tap any cell in the Phase column and use the pop-up
virtual keypad to set the phase for the harmonic with the specified order.
TIP
You can click or tap the SN input field to set the order to locate the specified harmonic quickly.
Channel Setup
You can also click or tap the "Channel" tab in
channel setup interface to configure channel output. For details, please refer to
Channel Setup
Enable the Channel Output
Enable the Channel Output
Refer to
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Figure 5.3 Table Editing Menu
.
of the "To Output Sine Wave" section.
Continuous
interface to access the
DG900 Pro User Guide
Continuous
47