Figure 14.2 Disk Management Interface - Rigol DS70000 Series User Manual

For the methods of using the numeric keypad, refer to descriptions in
Setting Method
• Set the Save Path
Click or tap the input field of File Path, then the disk management interface is
displayed. The interface is shown in the following figure:
Through the disk management menu, you can save the current reference
waveform to the internal memory or external USB storage device. Only when the
reference waveform is saved, can this export function be valid. For details about
the disk management operation, refer to the
and Load
Tip
DS70000 series oscilloscope only supports the flash memory USB storage device of FAT32
format.
For the "*.bin" format file, refer to
To Import from Internal or External Memory
You can import the stored reference waveform file from the internal memory or
external USB storage device to the internal instrument and display the file on the
screen.
Click or tap Import to enter the reference waveform file loading interface.
• Set the Format
Copyright ©RIGOL TECHNOLOGIES CO., LTD.
All rights reserved.
.

Figure 14.2 Disk Management Interface

. Then, click or tap Save to complete the save operation.
Binary Data Format (.bin)
Reference Waveform
Disk Management section in
.
DS70000 User Guide
Parameter
Store
203