[Pr. Pf94_Drive Recorder - Digital Channel Setting 4 (Drdc4)]; [Pr. Pf95_Drive Recorder - Clear History (*Drclr)] - Mitsubishi Electric MR-J5-G User Manual

[Pr. PF94_Drive recorder - Digital channel setting 4 (DRDC4)]

Initial value
801D8015h
[Pr. PF94.0-3_Drive recorder - Digital channel 7 selection]
Initial value
8015h
Refer to the following for values that can be assigned.
Page 144 [Pr. PF91.0-3_Drive recorder - Digital channel 1 selection]
[Pr. PF94.4-7_Drive recorder - Digital channel 8 selection]
Initial value
801Dh
Refer to the following for values that can be assigned.
Page 144 [Pr. PF91.0-3_Drive recorder - Digital channel 1 selection]

[Pr. PF95_Drive recorder - Clear history (*DRCLR)]

Initial value
00000000h
[Pr. PF95.0_Drive recorder - Clear history selection]
Initial value
0h
0: Disabled
1: Enabled
When "0" (enabled) is set, the drive recorder history will be cleared at the next power-on or software reset. After the drive
recorder history is cleared, "0" (disabled) will be set to this servo parameter automatically.
1 SERVO PARAMETER DETAILS
148
1.7 Extension setting 3 servo parameters group ([Pr. PF_ _ ])
Setting range
Refer to the relevant detail No.
Setting range
Refer to the text
Setting range
Refer to the text
Setting range
Refer to the relevant detail No.
Setting range
Refer to the text
Setting method
Each axis
Ver.
A0
Ver.
A0
Setting method
Each axis
Ver.
A0
Ver.
Refer to the relevant detail No.
Ver.
Refer to the relevant detail No.