Table of Contents
Advertisement
17 SERVICE WORK ON THE ENGINE
17.4
114
K01073-12
401955-12
Adding engine oil
Info
Too little engine oil or poor-quality engine oil will result in premature wear of the engine.
401955-10
–
Lay the motorcycle on its side and fill the oil filter housing to
about ⅓ full with engine oil.
–
Place the new oil filter into the housing.
–
Lubricate the O-ring of the oil filter cover and mount it with oil
7
filter cover
.
–
Mount and tighten screws
Guideline
Screw, oil filter cover
–
Stand the motorcycle upright.
–
8
Remove filler plug
with the O-ring, and fill up with engine
oil.
Engine oil
Info
Too little engine oil or poor-quality engine oil will result
in premature wear of the engine.
–
Mount and tighten the filler plug together with the O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and check it for leaks.
Finishing work
–
Check the engine oil level. (
Main work
–
1
Remove filler plug
with the O-ring.
–
Add the same engine oil used when the last oil change was
carried out.
Engine oil (SAE 10W/50) (
5
.
M6
10 Nm (7.4 lbf ft)
1.20 l
Engine oil (SAE
(1.27 qt.)
10W/50)
(
p. 132)
p. 111)
p. 132)
Advertisement
Table of Contents
