17
SERVICE WORK ON THE ENGINE
17.4
Adding engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
Main work
–
Remove oil filler plug
–
Fill engine oil to the middle
–
Add the same engine oil that was used when the motor was changed.
Engine oil (SAE 10W/50) (
Info
For optimal performance of the engine oil, do not mix different types of
engine oil.
If appropriate, change the engine oil.
–
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may
result in unconsciousness and/or death.
–
S00931-10
–
Start the engine and check that it is oil-tight.
Finishing work
–
Check the engine oil level. (
with the O-ring from the clutch cover.
of the level viewer.
p. 98)
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without
an effective exhaust extraction system.
p. 82)
85