Adding Engine Oil - Husqvarna 701 Enduro 2023 Owner's Manual

18.4

Adding engine oil

Info
Too little engine oil or poor-quality engine oil will result in premature wear of the engine.
SERVICE WORK ON THE ENGINE 18
–
Insert new oil filter
–
Lubricate the O-ring of the oil filter cover. Position oil filter
7
cover .
–
Mount and tighten screws
Guideline
Screw, oil filter cover
–
Fill up with engine oil at the clutch cover.
Engine oil
F00589-10
Info
Too little engine oil or poor-quality engine oil will result
in premature wear of the engine.
–
Mount and tighten filler plug
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
H01066-10
running the engine in an enclosed space.
–
Start the engine and check it for leaks.
Finishing work
–
Install the engine guard. (
–
Check the engine oil level. (
Main work
–
Remove filler plug
oil.
–
Fill engine oil to the middle of the level viewer.
Engine oil (SAE 10W/50) (
Info
For optimal performance of the engine oil, do not mix
different types of engine oil.
H01066-10
Husqvarna Motorcycles recommends changing the
engine oil.
–
Mount and tighten filler plug
8
.
6
.
M5 6 Nm (4.4 lbf ft)
1.70 l (1.8 qt.) Engine oil (SAE
10W/50)
( p. 131)
1
together with the O-ring.
p. 65)
p. 108)
1
with the O-ring, and fill up with engine
p. 131)
1
together with the O-ring.
111