Multiview Presets; Set The Position - RGBlink M2 User Manual

Hide thumbs Also See for M2:

Table of Contents

- Press the lit button in PGM area. The layers in PGM are also displayed in PST, synchronously;

- Select layer [A] or [B];

- Press the FREEZE button, the selected layer is frozen in both PST and PGM displays,

synchronously;

- Press the FREEZE button again, and the frozen layer will become live.

3.4.4 Multiview Presets

1. Press any button in Multiview Presets Area to select multiview layouts, including 1P, PIP CENT,

and 3P.

2. User can adjust the position, dimension for the selected layer, and set DSK, BLEND and MASK.

1. Press any button of [A]-[D] in Layer Selection Area, the light flashes when the layer is selected

and can be edited;

2. Press the POS button in Layer Adjustment Area, and enter to the menus as follows:

->H Pos

Use the rotary knob or joystick to adjust the position of the layer.

Push the joystick to the left or right, the horizontal position will be changed.

Push the joystick up or down, the vertical position will be changed.

If improper operation occurs, it can be restored by using RESET.

V Pos

Reset

Chapter 3: Using Your Product

120

329

Table of Contents