Table of Contents
Advertisement
17 .4.5
Checking the lubrication system
✓
-
Check the internal rotor and external rotor of oil pumps
If there is damage or wear:
-
Change the oil pumps.
8
-
Check oil pump shaft
If there is damage or wear:
-
Change the oil pump shaft.
-
Check the oil pump cover for damage and wear.
If there is damage or wear:
-
Change the oil pump cover.
Removing the crankshaft bearing inner race
17.4.6
00
0�
for damage and wear.
-
Fix the crankshaft in the vise.
Info
Use soft jaws.
-
Warm up special tool
Guideline
1150 °C (302 °F)
I
Puller (58429037037)
311613-10
-
Push the warmed up special tool
bearing inner race, press firmly together and pull jointly from
the crankshaft.
-
Take off the compensating disk.
-
Repeat the operation on the opposite side.
310340-10
O
for damage and wear.
O.
(�
p. 287)
O
onto the crankshaft
17 ENGINE
187
Advertisement
Table of Contents
