Removing The Shift Shaft; Removing The Shift Drum Locating Unit; Removing The Locking Lever - Husqvarna FC 450 2018 Repair Manual

17 ENGINE
17.3.25
17.3.26
17.3.27
184

Removing the shift shaft

Removing the shift drum locating unit

Removing the locking lever

(i)
-
Remove internal rotor
Remove the pin.
48
-
Push oil pump shaft
from the ignition side.
O
-
Push sliding plate away from the shift drum locating unit.
-
Remove shift shaft @ with the washer.
O.
-
Remove screw
Push away locking lever @ from shift drum locating unit
and remove the shift drum locating unit.
-
Relieve tension from the locking lever.
O
-
and remove together with locking lever @ ,
Unscrew
washer, sleeve and spring.
48.
and external rotor
inward and take it out of the engine
..
..
fs)
..
..