IBM 7383 Installation And Service Manual page 62

Procedure
1. Touch the static-protective package that contains the simple-swap fan to any
2. Unlock and remove the left-side cover (see "Removing the left-side cover" on
3. Open the fan cage cover.
4. Perform the following steps only if you want to install the simple swap fan in
5. Open the fan-locking handle on the replacement fan.
6. Insert the fan into the socket and close the handle to the locked position.
44
System x3500 M4 Type 7383: Installation and Service Guide
unpainted metal surface on the server; then, remove the fan from the package.
page 39).
the Fan 2 compartment:
a. Unfasten and open the release lever (see "Removing the fan cage assembly"
on page 304).
b. Press and release the clip on the fan filler to remove the fan filler from the
server.
c. Close and fasten the release lever.