IBM 7383 Installation And Service Manual page 128

v User Security
v Save Settings
v Restore Settings
v Load Default Settings
v Exit Setup
110
System x3500 M4 Type 7383: Installation and Service Guide
Select this choice to enter the POST event viewer to view the POST error
messages.
– System Event Log
Select this choice to view the system event log.
– Clear System Event Log
Select this choice to clear the system event log.
Select this choice to set, change, or clear passwords. See "Passwords" on page
111 for more information.
This choice is on the full and limited Setup utility menu.
– Set Power-on Password
Select this choice to set or change a power-on password. See "Power-on
password" on page 111 for more information.
– Clear Power-on Password
Select this choice to clear a power-on password. See "Power-on password" on
page 111 for more information.
– Set Administrator Password
Select this choice to set or change an administrator password. An
administrator password is intended to be used by a system administrator; it
limits access to the full Setup utility menu. If an administrator password is
set, the full Setup utility menu is available only if you type the administrator
password at the password prompt. See "Administrator password" on page
113 for more information.
– Clear Administrator Password
Select this choice to clear an administrator password. See "Administrator
password" on page 113 for more information.
Select this choice to save the changes that you have made in the settings.
Select this choice to cancel the changes that you have made in the settings and
restore the previous settings.
Select this choice to cancel the changes that you have made in the settings and
restore the factory settings.
Select this choice to exit from the Setup utility. If you have not saved the
changes that you have made in the settings, you are asked whether you want to
save the changes or exit without saving them.