IBM 7383 Installation And Service Manual page 247

Procedure
1. Unlock the left-side cover.
Note: You must unlock the left-side cover to open or remove the bezel. When
you lock the left-side cover, it locks both the cover and the bezel.
2. Open the bezel (see "Opening the bezel media door" on page 37).
3. Remove the filler panel, if one is present.
4. Touch the static-protective package that contains the disk drive to any
unpainted metal surface on the server; then, remove the disk drive from the
package and place it on a static-protective surface.
5. Grasp the black drive handle and slide the blue release latch to the right and
align the drive assembly with the guide rails in the bay.
6. Gently push the drive into the bay until the drive stops.
7. Close the bezel (see "Closing the bezel media door" on page 185).
8. Lock the left-side cover.
What to do next
If you have replaced a component or installed an optional device in the server, you
need to reconnect the power cords and all external cables, and turn on the server
and peripheral devices.
Chapter 6. Removing and replacing components
229