IBM 7383 Installation And Service Manual page 459

Table 39. IMM error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v If an action step is preceded by "(Trained technician only)", that step must be performed only by a trained
technician.
806f0028-2101ffff TPM command fail
has asserted.
Web interface messages
40000001-00000000 IMM Network
Initialization
Complete.
40000002-00000000 Certificate Authority
%1 has detected a %2
Certificate Error. (%1
=
IBM_CertificateAuthority.CADistinguishedName;
%2 =
CIM_PublicKeyCertificate.ElementName)
40000003-00000000 Ethernet Data Rate
modified from %1 to
%2 by user %3. (%1
=
CIM_EthernetPort.Speed;
%2 =
CIM_EthernetPort.Speed;
%3 = user ID)
40000004-00000000 Ethernet Duplex
setting modified from
%1 to %2 by user %3.
(%1 =
CIM_EthernetPort.FullDuplex;
%2 =
CIM_EthernetPort.FullDuplex;
%3 = user ID)
Error The TPM sensor
access has been
degraded or
unavailable.
Info An IMM network
has completed
initialization.
Error A problem has
occurred with the
SSL Server, SSL
Client, or SSL
Trusted CA
certificate that has
been imported into
the IMM. The
imported certificate
must contain a
public key that
corresponds to the
key pair that was
previously
generated by the
Generate a New
Key and
Certificate Signing
Request link.
Info A user has
modified the
Ethernet port data
rate.
Info A user has
modified the
Ethernet port
duplex setting.
Appendix C. Integrated management module II (IMM2) error messages
1. Turn off the server and disconnect
the power cords. Reconnect the
power cords and restart the server.
2. If the problem remains, (trained
technician only) replace the system
board (see Removing the system
board and Installing the system
board).
No action; information only.
1. Make sure that the certificate that
you are importing is correct.
2. Try importing the certificate again.
No action; information only.
No action; information only.
441