Replacing The Air Baffle - IBM 7383 Installation And Service Manual

Replacing the air baffle

Use this information to replace the air baffle.
Before you begin
Note: When you install the second microprocessor, you must also install fan 2 and
the air baffle that come with the second microprocessor upgrade kit.
Read the safety information in "Safety" on page vii and "Installation guidelines"
on page 34.
About this task
To replace the air baffle (two microprocessors installed), complete the following
steps.
Procedure
Slide the air baffle down into the server until the positioning pins fit into the
locating holes; then, press down on the air baffle until the pinch tab clicks into
place.
97
Chapter 2. Installing optional devices