IBM 7383 Installation And Service Manual page 462

Table 39. IMM error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v If an action step is preceded by "(Trained technician only)", that step must be performed only by a trained
technician.
40000012-00000000 Remote access
attempt failed.
Invalid userid or
password received.
Userid is '%1' from
WEB browser at IP
address %2. (%1 =
user ID; %2 = IP
address,
xxx.xxx.xxx.xxx)
40000013-00000000 Remote access
attempt failed.
Invalid userid or
password received.
Userid is '%1' from
TELNET client at IP
address %2. (%1 =
user ID; %2 = IP
address,
xxx.xxx.xxx.xxx)
40000014-00000000 The Chassis Event
Log (CEL) on system
%1 cleared by user
%2. (%1 =
CIM_ComputerSystem.ElementName;
%2 = user ID)
40000015-00000000 IMM reset was
initiated by user %1.
(%1 = user ID)
40000016-00000000 ENET[0]
DHCP-HSTN=%1,
DN=%2, IP@=%3,
SN=%4, GW@=%5,
DNS1@=%6. (%1 =
CIM_DNSProtocolEndpoint.Hostname;
%2 =
CIM_DNSProtocolEndpoint.DomainName;
%3 =
CIM_IPProtocolEndpoint.IPv4Address;
%4 =
CIM_IPProtocolEndpoint.SubnetMask;
%5 = IP address,
xxx.xxx.xxx.xxx; %6 =
IP address,
xxx.xxx.xxx.xxx)
444
System x3500 M4 Type 7383: Installation and Service Guide
Error A user has
attempted to log in
from a web
browser by using
an invalid login ID
or password.
Error A user has
attempted to log in
from a Telnet
session by using an
invalid login ID or
password.
Info A user has cleared
the IMM event log.
Info A user has initiated
a reset of the IMM.
Info The DHCP server
has assigned an
IMM IP address
and configuration.
1. Make sure that the correct login ID
and password are being used.
2. Have the system administrator reset
the login ID or password.
1. Make sure that the correct login ID
and password are being used.
2. Have the system administrator reset
the login ID or password.
No action; information only.
No action; information only.
No action; information only.