Scsi Connectors; Toc Button; Power Cord Connector - HP Visualize J2240 Service Handbook
J class workstation
Hide thumbs
Also See for Visualize J2240:
- Upgrade instructions (43 pages) ,
- Owner's manual (278 pages) ,
- Administration manual (171 pages)
Table of Contents
Advertisement
SCSI Connectors
Use the SCSI connectors to connect external SCSI devices such as DDS-format tape
drives and CD-ROM drives. Consult the documentation that accompanies each SCSI
device for specific information concerning its use. Refer to Appendix C for
information about connecting SCSI devices to your workstation.
NOTICE:
There must ALWAYS be a terminator at both ends of
a SCSI bus. This means one internal terminator and
one external terminator.
TOC Button
The TOC (transfer of control) button resets the system and transfers control from the
default device to an auxiliary device.
Power Cord Connector
Plug the workstation's power cord into the power cord connector to provide ac power
to the system.
Product Information
1–17
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Visualize J2240 and is the answer not in the manual?
Questions and answers