HP Visualize J2240 Service Handbook page 191

To display the current setting for a particular system path, follow the directions in
"Accessing the Boot Console Interface" earlier in this chapter, and then type the fol-
lowing at the prompt:
Main Menu: Enter a command or a menu >
where path_type is one of the path types listed in Table 9–1.
For example, to get the path to the primary boot device, follow the directions in
"Accessing the Boot Console Interface" earlier in this chapter, and then type the fol-
lowing at the prompt:
Main Menu: Enter a command or a menu >
To set a system path to a new value, follow the directions in "Accessing the Boot
Console Interface" earlier in this chapter, and then type the following at the prompt:
Main Menu: Enter a command or a menu >
where path_type is one of the path types listed in Table 9–1 and path is the specifica-
tion of the path in Mnemonic Style Notation (as described in Table 9–2). For exam-
ple, to set the primary boot path to a scsi disk with an ID of 6.0, follow the directions
in "Accessing the Boot Console Interface" earlier in this chapter, and then type the
following at the prompt:
Main Menu: Enter a command or a menu >
path path_type Enter
path primary Enter
path path_type path
path pri scsi.6.0 Enter
Boot Console
Enter
9–9