Displaying The Current Monitor Configuration - HP Visualize J2240 Service Handbook

Displaying the Current Monitor Configuration

To display the current monitor configuration for your system from the Configuration
Menu of the boot console interface, follow the directions in "Accessing the Boot
Console Interface" earlier in this chapter. Once you are in the Boot Console Interface
Main Menu, type:
Main Menu: Enter a command or a menu >
This places you in the Configuration Menu. From here type:
Configuration Menu: Enter command >
The screen displays a list of monitors, similar to the following.
NOTICE: The J Class workstation currently supports only a
1280x1024, 72 Hz color monitor in either 17–inch or
20–inch size.
MONITOR INFORMATION
Slot # HPA
––––––––– ––––––––
graphics0 f8000000
graphics1 f4000000
graphics2 f6000000
graphics3 fa000000
Current Console Path:
Stable Store Console Path:
In this example, the graphics cards are configured as follows
D
Graphics slot 0
D
Graphics slot 1
D
Graphics slot 2
9–12 Boot Console
configuration
monitor
State Resolution Frequency
––––––– –––––––––– –––––––––
Present 1280x1024
Empty
Empty
Present 1024x1024
GRAPHICS0
GRAPHICS0
Dual Graphics Card
Empty
Empty
Enter
Enter
Class
–––––
75Hz VESA
72Hz