HP Visualize J2240 Service Handbook page 223

Displaying System Information
The all command allows you to display the system's processor revision and speed,
cache size, memory size, flag settings, and the boot and console paths. To display
system information from the Information Menu, type the following at
tion menu prompt:
all Enter
This information is paged to allow you to view it as necessary.
Displaying PIM Information
The pim command allows you to display the most recent PIM information for the
specified fault type. To display PIM information for a specific fault, from the Service
Menu, type the following at the service menu prompt:
pim processor_number
You can use pim in the following ways:
pim – gives all fault types
pim 0 – HPMC information on processor
pim 0 fault_type – fault type information on processor
Enter
the informa-
Boot Console 10–21