HP Visualize J2240 Service Handbook page 97

Major Code Category 6 – Reserved
Table 4–11. MEMORY SUBSYSTEM FAULT Codes
Ostat Code Name
WARN 7701 USING_ALT CONFIG
WARN 7702 MEMORY_INIT_ONLY
WARN 7703 SIM_LOADING_WARNING
WARN 7704 RAM_BUS_WARNING
WARN 7705 GOOD_MEM_GOOFY
WARN 7706 MIXED_DRAMS
WARN 770F SMC_REV_1_WARNING
WARN 7800 PDT_DISABLED_WARNING
WARN 7801 UPDATE_SBE_OVRWRT
WARN 7802 UPDATE_DUP_ENTRY
FLT 7000 MEM_HPMC_ERR
FLT 7001 ICACHE_PARITY_ERROR
FLT 7002 DCACHE_PARITY_ERROR
FLT 7003 MSI_READ_ERROR
FLT 7004 MSI_WRITE_ERROR
FLT 7005 RUNWAY_ERROR
FLT 7006 WRITE_BOMB_ERROR
FLT 7007 MEMORY_ADDRESS_ERROR
FLT 7008 MULTI_BIT_ERROR
FLT 7009 SINGLE_BIT_ERROR
FLT 70FF UNKNOWN_HPMC
FLT 7FFF CATASTROPHIC_MEM_ERR
FLT 7101 MMC_NOT_RESPONDING
FLT 7102 MMC_NOT_READY_ERROR
FLT 7103 MMC_FAILED_TO_CLEAR
FLT 7104 MMC_STICKY_BITS
FLT 7105 MMC_BAD_REV
FLT 7106 MMC_REG_ERR
FLT 7107 MMC_ERR_IN_ECC_TEST
4–46 Troubleshooting
Notes
Using alternate memory config
Memory not tested, initialized only
GOOD_MEM>memory size
Has EDO and Standard memory installed
Overwrite SBE with MBE
Duplicate PDT entry
HPMC in memory system
Icache parity error in memory test
Dcache parity error in memory test
MSI read timeout
MSI write timeout
Runway parity error
Write bomb error
Memory address error
Multi–bit memory error
Single–bit memory error