Scsi Connectors; Power Cord Connector; Serial I/O Pins - HP Visualize J5000 - Workstation Service Handbook

Table 1–6. Serial I/O Pins
Pin No. Signal
1 DCD
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 RI

SCSI Connectors

Use the SCSI connectors to connect external SCSI devices such as DDS-format tape
drives and CD-ROM drives. Consult the documentation that accompanies each SCSI
device for specific information concerning its use. Refer to Appendix C for
information about connecting SCSI devices to your workstation.
NOTICE: There must ALWAYS be a terminator at both ends of
a SCSI bus. This means one internal terminator and
one external terminator.

Power Cord Connector

Plug the workstation's power cord into the power cord connector to provide ac power
to the system.
1–16 Product Information
Description
Data Carrier Detect
Receive Data
Transmit Data
Data Terminal Ready
Ground
Data Set Ready
Request To Send
Clear To Send
Ring Indicator