Displaying The Status Of The Eisa Slots - HP Visualize J2240 Service Handbook

Displaying the Status of the EISA Slots

The eisa command lets you identify all EISA cards currently installed on your work-
station by showing you the current status of your workstation's four EISA slots. It is
available only in the Information Menu.
To use the eisa command, from the Information Menu of the boot console interface,
type:
Information Menu: Enter command >
The following table appears:
Slot # Slot State
––––––– –––––––––––– ––––––––––––––––––––
1 Empty
2 Unconfigured HWP1850
3 Empty
4 Configured
In the table above, "Slot #" is the slot number as seen on the back of your worksta-
tion; "Slot State" is the current state of any card in each slot; and "Device Informa-
tion" is the compressed EISA ID, read from the EISA card itself.
9–14 Boot Console
eisa
Enter
Device Information
Empty
Empty
INP0100