Cpu Assembly; Removing The Cpu Assembly - HP Visualize J2240 Service Handbook

CPU Assembly

This section describes how to remove the J Class CPU assembly.
To remove the CPU assembly, open the system unit and follow these steps:
1. Remove the two screws in the center of the CPU Assembly.
2. Pull the ejector latches on the left side, top and bottom of the CPU Assembly to
release the assembly from the internal connectors. See Figure 5–10.
Figure 5–10. Removing the CPU Assembly
3. Pull the CPU Assembly straight out and place on a flat surface. This assembly is
heavy. Move it slowly and be sure it is properly supported.
Field Replaceable Units 5–17