Product Information
System Unit Rear Panel Connectors
SCSI Connectors
Use the SCSI connectors to connect external SCSI
devices such as DDS-format tape drives and CD-ROM
drives. Consult the documentation that accompanies
each SCSI device for specific information concerning
its use. Refer to Appendix C of the C Class Owner's
Guide for information about connecting SCSI devices
to your workstation.
NOTICE:
There must ALWAYS be a terminator at both ends
of a SCSI bus. This means one internal terminator
and one external terminator.
TOC Button
The TOC button resets the system and transfers con-
trol from the default device to an auxiliary device.
Power Cord Connector
Plug the workstation's power cord into the power cord
connector to provide ac power to the system.
20