Memory Rention Bracket; Removing Memory Dimms - HP Visualize J2240 Service Handbook

2. Remove the memory retention bracket, if equipped, shown in Figure 5–13 by
removing the two attachment screws.
Memory Bracket
Figure 5–13. Memory Retention Bracket
3. To remove a memory DIMM, open the ejector handles on both sides of the
DIMM. Lift the memory DIMM up and out of the connector. Place the memory
DIMM on a static-free surface. Figure 5–14 shows how to remove the memory
DIMM.
Figure 5–14. Removing Memory DIMMs
4. Go to the following section, "Memory DIMM Installation," to install the re-
placement DIMM.
5–20 Field Replaceable Units