Mnemonic Style Notation - HP Visualize J2240 Service Handbook

Displaying and Setting Paths
A path is the hardware address of a device that is attached to the I/O system of your
workstation. The path command sets the system paths shown in Table 10– 1.
The path command sets and displays the hardware address of a specified device at-
tached to the I/O bus of your workstation.
Path Type
primary or pri
alternate or alt
console or con
keyboard or key
The paths are displayed in Mnemonic Style Notation, as shown in Table 10– 2.
Table 10– 2
I/O Type
Built–in FWSCSI
Built–in SCSI
Optional
Built–in LAN
Table 10– 1 System Paths
Device
Your workstation's default boot de-
vice (usually the root disk)
Your workstation's alternate boot
device (usually a DDS–format tape
device)
Your workstation's primary display
device
Your workstation's primary ASCII
input device

Mnemonic Style Notation

Specification Format
fwsci.scsi_address.logi-
cal_unit_number
sescsi.scsi_address.logi-
cal_unit_number
gscn.scsi_address.logi-
cal_unit_number
lan.server_address.init_time-
out.io_timeout
Boot Console 10–9