Scsi Connectors; Toc Button; Power Cord Connector - HP Visualize b132L Owner's Manual

Hp visualize b132l: owners guide
Hide thumbs Also See for Visualize b132L:
Table of Contents

Advertisement

sys_ovrvw.doc 19 Thu Jul 11 10:44:28 1996
System Overview
System Unit Rear Panel Connectors

SCSI Connectors

Use the single-ended and fast, wide connectors to connect external SCSI
devices such as DDS-format tape drives and CD-ROM drives. Consult the
documentation that accompanies each SCSI device for specific information
concerning its use. Refer to Appendix C for information about connecting
SCSI devices to your workstation.
NOTICE:
When attaching external SCSI devices, be sure to terminate the last device
on the external SCSI bus. If there are no external SCSI devices, attach a
SCSI terminator to the back of the system.

TOC Button

The TOC (transfer of control) button resets the system and transfers control
from the default device to an auxiliary device.

Power Cord Connector

Plug the workstation's power cord into the power cord connector to provide
ac power to the system.
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Visualize b160lHp 9000 b132lHp 9000 b160l

Table of Contents