HP Visualize J2240 Service Handbook page 203

Boot Console Interface
Models J280/282/2240
The Boot Console Interface provides an "interactive" environment after the power–
on sequence.
Accessing the Boot Console Interface
To access the boot console interface, follow these steps:
1.
Close any files and applications on your workstation.
2.
Press the power switch on the front panel of the system unit.
NOTICE: There is no need to manually shut down the HP–
opeating system on your workstation before power-
ing it off. When you turn off the power switch, your
workstation automatically shuts down the operating
system before terminating the power.
Make sure that you do not unplug the system's power
cord or otherwise interrupt power to the system unit
at this time.
10
Boot Console 10–1