Table of Contents
Advertisement
4. Insert the hinged plastic connector at the left side of the CMA fully into the CMA
rail extension (
FIGURE 2-24
The plastic tab on the CMA rail extension locks the hinged plastic connector in place.
Mounting the Left Side of the Slide Rail
FIGURE 2-24
▼
To Verify the Operation of the Slide Rails and the CMA
Tip – Two people are needed for this procedure: one to move the server in and out
of the rack and one to observe the cables and CMA.
1. For a cabinet or a free-standing rack, deploy the anti-tilt bar.
2. Unlock the slide lock buttons (
chassis, and slowly pull the server out of the rack until the slide rails reach their
stops.
).
) at the right and left sides of the server
FIGURE 2-25
Chapter 2 Installing Servers and Back-End Storage
45
Advertisement
Table of Contents
