Figure 3-6 Removing A Side Panel - Sun Microsystems SPARCstorage Library Installation Manual

3
3.2.2.4 Removing the Side Panels
3-6
Note – You do not have to remove the side panels to install the tape library, but
you may want to remove them to make the installation of the tape library slide
rails easier.
1. Use the flat-blade screwdriver to unfasten the two captive screws at the
bottom of the side panel
See Figure 3-6.
Front view
Figure 3-6 Removing a Side Panel
2. Firmly grasp the outer edges of the side panel with both hands and lift up
on the panel to release the catches at the top.
Set the panel aside.
SPARCstorage Library Installation Manual—February 1995
Side panel
Captive screws