MacDon M105 Assembly Instructions Manual page 51

M105 Self-Propelled Windrower Pre-Delivery Checklist - N.A.
Perform these checks and adjustments prior to delivery to your Customer. The completed Checklist should be
retained either by the Operator or the Dealer.
CAUTION: Carefully follow the instructions given. Be alert for safety related messages which
bring your attention to hazards and unsafe practices.
Windrower Serial Number: __________________ Engine Serial Number: _____________________

Check for shipping damage or missing parts. Be sure all shipping dunnage is removed.
Check for loose hardware. Tighten to required torque if necessary.
Check tire air pressures and adjust as required.
Check final drive hub lubricant level.
Check engine coolant level and strength at reserve tank.
Check air cleaner and clamps.
Check hydraulic oil level, and check for leaks along lines.
Check fuel separator for water and foreign material. Drain and clean as necessary. Add fuel.
Check tension of A/C compressor belt.
Check machine completely lubricated.
Check Neutral Interlock system.
Check engine warning lights at Cab Display Module.
Check Cab Display Module for operation.
Check Operator's Presence System.
Check alternator charge rate on CDM.
Check air conditioning functioning properly.
Check heater functioning properly.
Check interior lights for operation.
Check maximum (no load) engine speed at Cab Display Module: 2270 - 2330 rpm.
Check exterior lights for operation.
Complete the Header Pre-Delivery Checklist.
Check that manuals are with the windrower.
Check plastic coverings from cab interior removed.
Date Checked: _________________________
Form 169558
START ENGINE AND RUN TO OPERATING TEMPERATURE
ITEM
Checked by: __________________________________
PAGE
---
4
39
39
39
40
40
40
41
29
42
43
44
45
44
47
47
46
44
45
---
47
47
Revision A