MacDon M105 Assembly Instructions Manual page 5

Stop engine, and remove key from
•
ignition before leaving Operator's seat
for any reason. A child or even a pet
could engage an idling machine.
Keep the area
•
machinery clean and dry. Wet or oily
floors are slippery. Wet spots can be
dangerous when working with electrical
equipment. Be sure all electrical outlets
and tools are properly grounded.
Use adequate light for the job at hand.
•
Keep machinery clean. Do not allow oil or
•
grease to
platforms, ladders or controls. Clean
machines before storage.
Never use gasoline, naphtha or any
•
volatile material for cleaning purposes.
These materials may be toxic and/or
flammable.
When storing machinery, cover sharp or
•
extending components to prevent injury
from accidental contact.
Form 169558
used for servicing
accumulate on service
GENERAL
3 Revision A