Step 14. Perform Pre- Delivery Checks; Serial Numbers; Final Drive Lubricant Level; Tire Pressures - MacDon M105 Assembly Instructions Manual

STEP 14. PERFORM PRE-
DELIVERY CHECKS
WARNING
Stop windrower engine, and remove key
before making adjustments to machine. A
child or even a pet could engage the drive.
a. Perform the final checks and adjustments as
listed on the "Pre-Delivery Checklist" (yellow
sheet attached to back of this instruction) to
ensure the machine is field-ready. Refer to the
following pages for detailed instructions as
indicated on the Checklist.
b. The completed Checklist should be retained
either by the Operator or the Dealer.
A. SERIAL NUMBERS
a. Record windrower and engine serial numbers on
Checklist.
B. FINAL DRIVE LUBRICANT LEVEL
OIL LEVEL
a. Rotate wheel so that one of the plugs is
horizontally aligned with the center of the hub.
b. Remove the plug.
through the hole, or slightly running out.
Form 169558
PRE-DELIVERY CHECKS
The oil should be visible
C. TIRE PRESSURES
Measure tire pressure with a gauge.
TIRE TYPE
Bar
Turf
All Rear Tire Pressures are 10 psi (69 kPa)
D. ENGINE COOLANT
a. Check the coolant level in the coolant recovery
tank (A). Tank should be at least one-half full.
b. Check coolant concentration in the radiator.
Coolant shall be good for temperatures of -30°F
(-34°C).
39
SIZE PRESSURE
18.4 - 26 32 psi (221 kPa)
600 - 65R28 26 psi (179 kPa)
18.4 - 26 35 psi (241 kPa)
23.1 - 26 20 psi (138 kPa)
580 / 70 R26 24 psi (165 kPa)
A
Revision A