MacDon M105 Assembly Instructions Manual page 22

j. Attach stud (supplied with radio) to center rear of
radio.
k. Attach support (D) to
stud on back of radio
chassis with lock
washer and metric nut
(E) that was supplied
with the support.
l. Support can
attached to chassis in
multiple locations to
allow for proper
mounting of radio.
m. Re-install radio panel with original screws.
J
n. Adjust bracket (J) if necessary by loosening nuts
(K) to allow radio to slide into opening, and
securely capture support (D).
o. Turn battery disconnect switch to ON position.
p. Turn ignition key to ACC, switch radio ON, and
check operation in accordance with instructions
supplied with the radio.
Form 169558
UNLOADING AND ASSEMBLY
E
be
D
K
D
20
Revision A